Alle Beiträge von Christian Sonntag

Fanatec Gran Turismo DD Pro Settings

Below are some example settings for the Fanatec DD Pro Grand Turismo wheel. Values are from the Fanatec forums. Links available at the bottom.

# Gran Turismo DD Pro

## Dirt Rally 2.0

Tuning Menu Settings:
SEN 540 for modern cars, 900 for classic cars
FF 100
FFS Peak
NDP 35
NFR 5
NIN Off
INT 3
FEI 100
FOR 100
SPR 100*
DPR 100*
BLI User Preference
SHO 100
BRF User Preference

*SPR has no effect, DPR is directly connected to the Wheel Friction in-game setting.

In-Game Settings:
Vibration & Feedback: On
Self Aligning Torque: 70
Wheel Friction: 15
Tyre Friction: 30
Suspension: 70
Collision: 50
Soft Lock: 50
Steering Centre Force Enabled: On
Steering Center Force: 50

## Grand Tourismo Sports

Tuning Menu Settings:
SEN AUT
FF 100
FFS Peak
NDP 30
NFR Off
NIN Off
INT 3
FEI 100
FOR 100
SPR 100
DPR 100
BLI User Preference
SHO 100
BRF User Preference

In-Game Settings:
Force Feedback Max Torque: 5
Force Feedback Sensitivity: 1


## Asseto Corsa

SEN Manual adjustment per car
FF 100
FFS Peak
NDP 25
NFR 5
NIN Off
INT 6
FEI 100
FOR 100
SPR 100
DPR 100
BLI User Preference
SHO 100
BRF User Preference
In-Game Settings:

Steer lock: 1080
Gain: 70
Min Force: 0
Dynamic Damping: 100
Road Effects: 0

Links:

https://forum.fanatec.com/discussion/652/gran-turismo-sport-ps4-ps5-fanatec-recommended-settings

https://bi.fanatec.com/discussion/643/dirt-rally-2-0-ps4-fanatec-recommended-settings

https://bi.fanatec.com/discussion/12758/assetto-corsa-competizione-ps4-fanatec-recommended-settings

typo3 extension builder missing extension root storagepath in folder select

If you can not save your new created extension to a correct path then maybe a additional first entry in your project composer.json is needed.

"repositories": 
  [ 
    { "type": "path", "url": "./packages" },
    ...
    ...
  ]

There will be now a „root“ storagePath an the extension could be saved in the correct location. In my case without this config it would be accidently saved nested into the folder of another extension.

TYPO3 Version
10.4.23 composer mode

Extension Builder Version:
git v10.0.3

WII join splitted ISO dump files from CleanRip homebrew

If you have only the possibility to use a FAT32 formatted USB drive to rip the ISO files CleanRip will split them to separate chunks.

For later use with the Dolphin emulator or maybe with a Batocera Linux they have to be joined together again. See following example:

cat RQJP7D.part{0..4}.iso > Crash.iso

As you can see you can join the files with the cat command back to one large iso file. Change filenames to your situation ;o)

Happy ripping/backup-ing your GameCube or Wii games.

GameCube with qoob Pro mod ripp games to ISO file

With the GameCube qoob Pro mod you can ripp games to iso files. Beside the mod itself you need also an installed Nintendo GameCube Broadband Adapter.

First your network has to prepared. I have reactivated an old router from me for this case.

GameCube qoob pro mod attached to router

If needed it is recommended to set the router base ip address to 192.168.1.1

The default qoob Pro ip address is 192.168.1.32 The ip of the used computer should have 192.168.1.100 (as described here).

If your setup is done insert the game. Power on the GameCube and hold the B button to open the qoob menu.

Open a browser on your computer and open the URL: http://192.168.1.32/DVD

The browser starts to download a file named ‚DVD‚ of the current inserted game. A rip/download takes approximately 40 minutes. If the download is finished rename ‚DVD‚ to a appropriate name of the game.